Root filling quality and bond strength of endodontic sealers to human and bovine dentin / Qualidade da obturação e resistência de união de cimentos endodônticos à dentina humana e bovina

Objetivo: Este estudo teve como objetivo comparar a qualidade da obturação e a resistência de união de dois cimentos endodônticos, AH Plus e Bio-C Sealer, em dentes humanos e bovinos. Métodos: Os canais radiculares de 60 dentes unirradiculares [30 humanos (H) e 30 bovinos (B)] foram preparados e obturados por condensação lateral da guta-percha e AH Plus (grupos AP-H e AP-B) ou Bio-C Sealer (grupos BC-H e BC-B). Seis fatias de 1,5 mm de espessura foram obtidas de cada raiz. Os espécimes foram observados em estereomicroscópio para avaliar a qualidade da obturação, considerando possíveis espaços vazios no material obturador. Posteriormente, as fatias radiculares foram avaliadas em termos de resistência de união por push-out e modo de falha. Os dados foram analisados pelos testes de Mann-Whitney e coeficientes de correlação de Spearman (α=5%). Resultados: A qualidade de obturação fornecida por AP e BC foi semelhante em ambos os substratos de dentina. No entanto, ao comparar dentes humanos e bovinos, os escores de espaços vazios foram maiores nas amostras bovinas, para ambos os cimentos. AP teve maior resistência de união à dentina humana e bovina do que BC. No entanto, não houve diferença significativa na resistência de união entre os substratos dentinários, para ambos os cimentos testados. Além disso, houve uma correlação positiva e moderada entre os valores de resistência de união de dentes humanos e bovinos. O modo de falha misto foi o mais prevalente. Conclusão: AP e BC fornecem qualidade de obturação semelhante, mas o primeiro apresenta maiores valores de resistência de união à dentina humana e bovina. A utilização de dentes bovinos como substitutos de amostras humanas parece ser adequada em estudos relacionados à resistência de união, mas não naqueles que testam a qualidade da obturação endodôntica.(AU)

Objective: This study aimed to compare the filling quality and bond strength of two endodontic sealers, AH Plus and Bio-C Sealer, in human and bovine teeth. Methods: The root canals of 60 [30 human (H) and 30 bovine (B)] single-rooted teeth were prepared and filled by lateral condensation of gutta-percha and AH Plus (groups AP-H and AP-B) or Bio-C Sealer (groups BC-H and BC-B). Six 1.5-mm-thick slices were obtained from each root. The specimens were observed under a stereomicroscope to assess filling quality, considering possible voids within the filling material. Subsequently, root slices were evaluated in terms of push-out bond strength and failure mode. Data were analyzed by Mann-Whitney tests and Spearman correlation coefficients (α=5%). Results: The filling quality provided by AP and BC was similar in both dentin substrates. However, when comparing human and bovine teeth, void scores were greater in the bovine samples, for both sealers. AP had higher bond strength to human and bovine dentin than BC. However, there was no significant difference in bond strength between dentin substrates, for both sealers tested. Also, there was a positive and moderate correlation between the bond strength values of human and bovine teeth. The mixed failure mode was the most prevalent. Conclusion: AP and BC provide similar filling quality, but the first presents higher bond strength values to human and bovine dentin. The use of bovine teeth as substitutes for human samples seems adequate in studies related to bond strength, but not in those testing root canal filling quality.(AU)

Mechanical behavior of different machinable ceramic crowns using vertical and horizontal preparations: an in-vitro study / Comportamento mecânico de diferentes coroas cerâmicas usináveis usando preparos verticais e horizontais: um estudo in vitro

Objective: the aim of this study was to compare the mechanical behavior of different ceramics when used in thin vertical preparations versus traditional horizontal preparation. Material and Methods: two stainless-steel dies were milled to simulate a minimally invasive vertical preparation (VP) and a traditional horizontal preparation (HP) for an all-ceramic crown of a maxillary first premolar. The stainless-steel dies were duplicated using epoxy resin. Eighty monolithic crowns were milled and divided into 2 groups according to preparation design. Each design group was subdivided into 4 sub-groups according to material (n=10): IPS e.max CAD (lithium disilicate), Bruxzir shaded zirconia (full contour zirconia), CeraSmart (resin nanoceramic) and CEREC Tessera (advanced lithium disilicate). The crowns were cemented on their relevant epoxy resin dies using self-adhesive resin cement. All specimens were subjected to 15,000 thermocycles and then loaded to fracture in a universal testing machine. Data were analyzed using two-way ANOVA and Tukey pair wise comparison test. Results: the fracture resistance mean values of the VP (1344 + 118 N) was significantly lower than the HP design (1646 + 191 N). Ceramic crowns made of full contour zirconia had higher fracture resistance mean values (2842 + 380 N) than advanced lithium disilicate (1272 + 125 N) followed by lithium disilicate crowns (983 + 52 N) and resin nanoceramic (882 + 61 N). Conclusion: both vertical and horizontal preparations, regardless the different ceramic materials, showed clinically acceptable fracture resistance values. (AU)

Objetivo: o objetivo deste estudo foi comparar o comportamento mecânico de diferentes cerâmicas quando utilizadas em preparos verticais finos ou preparos horizontais tradicionais. Material e Métodos: dois modelos de aço inoxidável foram fresados para simular um preparo vertical minimamente invasivo (PV) e um preparo horizontal tradicional (PH) para uma coroa totalmente em cerâmica de um primeiro pré-molar superior. As matrizes de aço inoxidável foram duplicadas usando resina epóxi. Oitenta coroas monolíticas foram fresadas e divididas em 2 grupos de acordo com o desenho do preparo. Cada grupo foi subdividido em 4 subgrupos de acordo com o material (n=10): IPS e.max CAD (dissilicato de lítio), zircônia Bruxzir (zircônia de contorno total), CeraSmart (resina nanocerâmica) e CEREC Tessera (dissilicato de lítio avançado). As coroas foram cimentadas em suas respectivas matrizes de resina epóxi usando cimento resinoso autoadesivo. Todos os espécimes foram submetidos a 15.000 ciclos térmicos e então carregados até a fratura em uma máquina de teste universal. Os dados foram analisados usando ANOVA com dois fatores e teste de comparação por pares de Tukey. Resultados: os valores médios de resistência à fratura do PV (1344 + 118 N) foram significativamente menores do que PH (1646 + 191 N). As coroas de cerâmica feitas de zircônia de contorno total apresentaram maiores valores médios de resistência à fratura (2842 + 380 N) do que dissilicato de lítio avançado (1272 + 125 N), seguido por coroas de dissilicato de lítio (983 + 52 N) e resina nanocerâmica (882 + 61 N). Conclusão: preparos verticais e horizontais, independentemente dos diferentes materiais cerâmicos, apresentaram valores de resistência à fratura clinicamente aceitáveis. (AU)

Application status and prospect of single-cone obturation technique with bioceramic sealers / 中华口腔医学杂志

Compared with cold lateral condensation and continuous wave of condensation which are classically used in clinical, newly emerging single-cone obturation technique is easy-to-operate as well as time-saving. Especially when combined with bioceramic root canal sealers of improved physicochemical and biological properties, single-cone obturation technique showed satisfactory short-term outcomes in clinical observations. However, difficulties still exist in avoiding the root canal overfilling and in operating the retreatment. Besides, the long-term effects of single-cone obturation with bioceramic sealers still remain unclear. This article makes an overview on the history and development of single-cone obturation ,and provides analysis of its pros and corns. Furthermore, we would also like to summarize its clinical application and look into its future improvements.

Influência dos cimentos obturadores biocerâmicos versus o AH Plus® na dor pós-operatória, penetração em túbulos dentinários e atividade antimicrobiana: revisões sistemáticas e meta-análises / Influence of bioceramic root canal sealer versus AH Plus® on postoperative pain, penetration into dentinal tubules and antimicrobial activity: systematic reviews and meta-analyses

O objetivo desse estudo de revisões sistemáticas e meta-análises foi responder se os cimentos biocerâmicos resultam melhores efeitos para a dor pós operatória, capacidade em penetração em túbulos dentinários e atividade antimicrobiana em comparação ao cimento AH Plus®. Foram conduzidas duas revisões sistemáticas, orientadas pelas diretrizes PRISMA e foram registradas na PROSPERO (CRD4202125928) (Capítulo 1) e na Open Science Framework (OSF) Registries (https://doi.org/10.17605/OSF.IO/BX7VQ) (Capítulo 2). Uma pergunta foi feita com base na população, intervenção, comparação e resultado (PICO), Capítulo 1: "O uso dos cimentos biocerâmicos resulta em menos dor pós operatória em comparação ao uso do cimento AH Plus® em pacientes tratados endodonticamente?"; Capítulo 2: "Os cimentos obturadores biocerâmicos apresentam superioridade na penetração em túbulos dentinários e atividade antimicrobiana ao cimento obturador AH Plus®?". Foram definidas as estratégias de buscas e realizadas buscas nas bases de dados: PubMed, Scopus, Web of Science, Embase, Cochrane Library, e OpenGrey. O Capítulo 1 utilizou a escala Cochrane para avaliar o risco de viés e a ferramenta GRADE para avaliar a qualidade das evidências. Enquanto, o Capítulo 2 utilizou a escala The Joanna Briggs para avaliar o risco de viés de estudos in vitro. As metaanálises foram conduzidas usando o "Meta" package, version 3.6.3, a diferença média (MD) medida de efeito foi calculada para variáveis quantitativas e odds ratio (OR) (Capítulo 1) e diferenças de médias padronizadas (SMD) (Capítulo 2), com um intervalo de confiança (IC) de 95%. Os resultados do Capítulo 1, foram incluídos 13 artigos na revisão sistemática, 11 foram incluídos na meta-análise. Para as variáveis quantitativas, o cimento biocerâmico apresentou menor ocorrência de dor pós-operatória do que o cimento AH Plus® em 24h (MD - 0,4101 [-0,80; -0,02], p = 0,0386) e 48h (MD -0,31 [-0,59; -0,03], p = 0,0295). Para as variáveis binárias, não houve diferença observada entre os cimentos avaliados: 24h (OR 1,12 [0,69; 1,80] p = 0,6476), 48h (OR 1,56 [0,76; 3,20] p = 0,2267), 72h (OR 1,38 [0,55; 3,45] p = 0,4893) e 7 dias (OR 2,10 [0,55; 8,01], p = 0,2790). Em relação à análise de risco de viés, observou-se baixo risco para a maioria dos domínios, exceto alocação que foi considerada pouco clara, enquanto a certeza da evidência variou de moderada a baixa. Os resultados do Capítulo 2, foram um total de 54 estudos foram incluídos, e 16 estudos foram incluídos na meta-análise. De modo geral, os estudos apresentaram baixo risco de viés. Não foi observado diferença estatística entre os cimentos avaliados para penetração em túbulos dentinários, independentemente dos terços: coronal SMD 0.58 [0.14; 1.31], p = 0.12; médio SMD 0.07 [0.54; 0.39], p = 0.75; e apical: SMD 0.08 [0.73; 0.56], p = 0.80. Os cimentos biocerâmicos e AH Plus® demonstraram similar ação antimicrobiana SMD [3.42; 5.32], p = 0.67 e SMD 0.67 [1.89; 0.55], p = 0.2825. Dessa forma, conclui-se que os cimentos biocerâmicos apresentam menor dor pós operatória nas primeiras 24 e 48 horas, e apresentam respostas similares para penetração em túbulos dentinários e atividade antimicrobiana quando comparado ao cimento AH Plus®(AU)

The aim of this study of systematic reviews and meta-analyses was to answer whether bioceramic sealers have better effects on postoperative pain, ability to penetrate dentinal tubules and antimicrobial activity compared to AH Plus® sealer. Two systematic reviews, guided by PRISMA guidelines, were conducted and registered in PROSPERO (CRD4202125928) (Chapter 1) and Open Science Framework (OSF) Registries (https://doi.org/10.17605/OSF.IO/BX7VQ) (Chapter 2). A question was asked based on population, intervention, comparison and outcome (PICO), Chapter 1: "Does the use of bioceramic sealers result in less postoperative pain compared to the use of AH Plus® sealer in endodontically treated patients?"; Chapter 2: "Do bioceramic filling sealers have superior penetration into dentinal tubules and antimicrobial activity compared to AH Plus® filling sealer?". Search strategies were defined and searches performed in the following databases: PubMed, Scopus, Web of Science, Embase, Cochrane Library, and OpenGrey. Chapter 1 used the Cochrane scale to assess the risk of bias and the GRADE tool to assess the quality of evidence. Meanwhile, Chapter 2 used The Joanna Briggs scale to assess the risk of bias from in vitro studies. Meta-analyses were conducted using the "Meta" package, version 3.6.3, the mean difference (MD) effect measure was calculated for quantitative variables and odds ratio (OR) (Chapter 1) and standardized mean differences (SMD) (Chapter 2), with a 95% confidence interval (CI). The results of Chapter 1 were included 13 articles in the systematic review, 11 were included in the meta-analysis. For quantitative variables, the bioceramic sealer had a lower occurrence of postoperative pain than the AH Plus® sealer in 24 hours (MD - 0.4101 [-0.80; - 0.02], p = 0.0386) and 48h (MD -0.31 [-0.59; -0.03], p = 0.0295). For the binary variables, there was no difference observed between the sealers evaluated: 24h (OR 1.12 [0.69; 1.80] p = 0.6476), 48h (OR 1.56 [0.76; 3.20] p = 0.2267), 72h (OR 1.38 [0.55; 3.45] p = 0.4893) and 7 days (OR 2.10 [0.55; 8.01], p = 0 .2790). Regarding the risk of bias analysis, a low risk was observed for most domains, except for allocation that was considered unclear, while the certainty of evidence ranged from moderate to low. The results of Chapter 2 were a total of 54 studies included, and 16 studies were included in the meta-analysis. Overall, the studies had a low risk of bias. There was no statistical difference between the sealers evaluated for penetration into dentinal tubules, regardless of the thirds: coronal SMD 0.58 [0.14; 1.31], p = 0.12; average SMD 0.07 [0.54; 0.39], p = 0.75; and apical: SMD 0.08 [0.73; 0.56], p = 0.80. Bioceramic sealers and AH Plus® demonstrated similar antimicrobial action to SMD [3.42; 5.32], p = 0.67 and SMD 0.67 [1.89; 0.55], p = 0.2825. Thus, it is concluded that bioceramic sealers have less postoperative pain in the first 24 and 48 hours, and have similar responses for penetration into dentinal tubules and antimicrobial activity when compared to AH Plus® sealer(AU)

Molhabilidade de um cimento endodôntico à base de resina epóxi na dentina tratada com diferentes protocolos de quelação / Wettability of an epoxy resin-based root canal sealer on dentin treated with different chelating protocols

Objetivo: Avaliar a molhabilidade do cimento AH Plus em contato com a dentina radicular após diferentes protocolos quelantes envolvendo ácido etidrônico (HEBP) e o EDTA. Métodos: Cinquenta e seis fatias de dentina radicular foram utilizadas e irrigadas com 5.25% de hipoclorito de sódio (NaOCl) ou com uma mistura de 5.25%NaOCl/18%HEBP para simular a irrigação durante o preparo químico-mecânico. As amostras irrigadas com NaOCl foram divididas em 5 grupos, de acordo com o agente quelante: G1- água destilada (AD); G2-17%EDTA; G3-17%EDTA+2.5%NaOCl; G4-18%HEBP; e G5-18%HEBP+2.5%NaOCl. As amostras irrigadas com a mistura de NaOCl/HEBP foram dividias em 2 grupos: G6-AD; G7-NaOCl/HEBP+2.5%- NaOCl. Todos os protocolos receberam irrigação de AD entre as substâncias irrigadoras e como lavagem final. O goniômetro Rame-Hart foi utilizado para mesurar o ângulo de contato entre a superfície da dentina radicular e o cimento. O teste estatístico Kruskal-Wallis e Dunn foram aplicados (p<0.05). Resultados: Os grupos onde a smear layer foi removida apresentaram menor ângulo de contato (p<0.05), com exceção do G7. O G6 apresentou o menor ângulo de contato do AH Plus, entretanto, a irrigação final com NaOCl (G7) aumentou significativamente o ângulo de contato. G2 e G4 apresentaram comportamento similar e a irrigação final com NaOCL (G3 e G4) não modificou a molhabilidade da dentina. Conclusão: O tratamento da dentina radicular com a mistura NaOCl/HEBP, quando usada como irrigante, conferiu boa molhabilidade desta superfície ao cimento AH Plus(AU).

Evaluate the wettability of AH Plus in contact with root dentin after different chelating protocols involving etidronic acid (HEBP) and EDTA. Material and Methods: Fifty six human polished root dentin slices were used. They were irrigated with 5.25% sodium hypochlorite (NaOCl) or a mixture of 5.25%NaOCl/18%HEBP to simulate irrigation during chemomechanical preparation. The specimens irrigated with NaOCl were divided into 5 groups regarding chelating agents: G1-destiled water (DW); G2- 17%EDTA; G3-17%EDTA+2.5%NaOCl; G4-18%HEBP; and G5-18%HEBP+2.5%NaOCl. The specimens irrigated with the mixture NaOCl/HEBP were divided into 2 groups: G6-DW; G7-NaOCl/HEBP+2.5%NaOCl. All protocols received irrigation with DW between irrigants and as final rinse. Rame-Hart goniometer was used to measure the contact angle between the dentin surfaces and the sealer. Kruskal-Wallis and Dunn tests were applied (p<0.05). Results: Groups in which the smear layer was removed showed a lower contact angle (p<0.05), except for G7. The G6 showed the lowest contact angle of AH Plus, but the NaOCl final irrigation (G7) increased the angle. G2 and G4 have similar behaviour and final irrigation with NaOCl (G3 and G5) did not change wettability when these chelators were used. Conclusions: The mixture NaOCl/HEBP showed good effect on the wettability of sealer on to the root canal dentine, when used as main irrigant (AU).

A comparative evaluation of the sealing ability of two calcium silicate based sealers and a resin epoxy-based sealer through scanning electron microscopy and bond strength: an in vitro study

Aim: this study aimed to compare the sealing ability of two types of commercially available calcium silicate bioceramic based root canal sealers and a resin based root canal sealer. Methods: Twenty one single-rooted teeth were used, samples (n= 21) were randomly divided into three groups according to the sealer used (group A; ADSEAL, group B; Wellroot, group C; Ceraseal). Roots were then cleaved longitudinally in the labiolingual direction; all samples were then sectioned at three, six, and nine mm from the root tip. The penetration of sealers into the dentinal tubules was examined at 1000x with a scanning electron microscope. Data were tested for normality using Shapiro Wilk test. ANOVA test was used for analyzing normally distributed data followed by Bonferroni post hoc test for pair-wise comparison. Significance level p≤0.001. Results: groups B and C showed better sealing ability than group A in all the three sections. The coronal section showed higher sealing ability than the middle section followed by the apical section in the three tested groups. Conclusion: it can be concluded that both calcium silicate-based sealers had better sealing ability and higher bond strength than the resin epoxy- based sealer

Physicochemical properties, cytocompatibility and antibiofilm activity of a new calcium silicate sealer

Abstract The aim of this study was to evaluate the physicochemical properties, cytocompatibility and antibiofilm activity of a new calcium silicate-based endodontic sealer, Sealer Plus BC (MK Life, Brazil), in comparison with TotalFill BC Sealer (FKG Dentaire SA, Switzerland) and AH Plus (Dentsply, Germany). Setting time and flow were evaluated based on ISO 6876 standard. The pH was evaluated after different periods, and radiopacity by radiographic analysis (mmAl). Solubility (% mass loss) and volumetric change (by micro-CT) were assessed after 30 days of immersion in distilled water. Cytocompatibility was assessed by methyltetrazolium (MTT) and neutral red (NR) assays, after exposure of Saos-2 cells to the sealer extract for 24 h. An additional analysis was performed by using MTT assay after 1, 3 and 7 days of exposure of Saos-2 to the sealers 1:8 dilution extracts. Antibiofilm activity against Enterococcus faecalis and/or Candida albicans was evaluated by crystal violet assay and modified direct contact test. The physicochemical properties were analyzed using ANOVA/Tukey tests; MTT and NR data were analyzed by ANOVA and Bonferroni tests; the antimicrobial tests were analyzed by Kruskal-Wallis and Dunn tests (α=0.05). Sealer Plus BC had proper setting time, radiopacity, flow and alkalization capacity. Sealer Plus BC was significantly more soluble than AH Plus (p<0.05) and presented volumetric change similar to AH Plus and TotalFill BC (p>0.05). Sealer Plus BC presented antibiofilm activity and no cytotoxic effect. In conclusion, although Sealer Plus BC had higher solubility, this sealer showed proper physicochemical properties, cytocompatibility, and antibiofilm activity.

Resumo O objetivo deste estudo foi avaliar as propriedades físico-químicas, a citocompatibilidade e a atividade antibiofilme de um novo cimento endodôntico à base de silicato de cálcio, Sealer Plus BC (MK Life, Brasil), em comparação com TotalFill BC Sealer (FKG Dentaire SA, Suíça) e AH Plus (Dentsply, Alemanha). O tempo de presa e o escoamento foram avaliados com base nas normas ISO 6876. O pH foi avaliado após diferentes períodos, e a radiopacidade por análise radiográfica (mmAl). A solubilidade (% de perda de massa) e alteração volumétrica (por micro-CT) foram avaliadas após 30 dias de imersão em água destilada. Citocompatibilidade foi avaliada pelos ensaios metiltetrazólio (MTT) e vermelho neutro (NR), após exposição das células Saos-2 ao extrato de cimento por 24 horas. Análise adicional foi realizada através do ensaio MTT após 1, 3 e 7 dias de exposição das células Saos-2 aos extratos dos cimentos na diluição de 1:8. Atividade antibiofilme contra Enterococcus faecalis e/ou Candida albicans foi avaliada pelos ensaios cristal violeta e contato direto modificado. As propriedades físico-químicas foram analisadas utilizando os testes ANOVA e Tukey; MTT e NR foram analisados pelos testes ANOVA e Bonferroni; os ensaios antimicrobianos foram analisados pelos testes Kruskal-Wallis e Dunn (α=0.05). Sealer Plus BC apresentou tempo de presa, radiopacidade e escoamento adequados, além de capacidade de alcalinização. Sealer Plus BC foi significantemente mais solúvel que AH Plus (p<0.05) e apresentou alteração volumétrica similar à de AH Plus e TotalFill BC (p>0.05). Sealer Plus BC apresentou atividade antibiofilme, sem efeito citotóxico. Como conclusão, embora Sealer Plus BC apresente maior solubilidade, este cimento apresentou propriedades físico-químicas adequadas, citocompatibilidade e atividade antibiofilme.

M1 and M2 macrophages phenotypes modulation after stimuli with materials used in endodontic treatment

Abstract The aim of this study was to evaluate the M1 and M2 macrophage modulation after stimuli with different materials used during endodontic treatment. In bone marrow-derived macrophage cell culture, from males C57BL/6 wild-type (WT) mice, gene expression analysis of markers to M1 and M2 macrophages was performed by qRT-PCR (Cxcl10, CxCL9, iNOS, Arg1, Chil3, Retnla and MRC1) and cytokine quantification by Luminex® (GM-CSF, IL-10, IL-6, IL-1β and TNF-α) after exposure to the five endodontic sealers: AH Plus, Sealapex Xpress, Endosequence BC Sealer, BioRoot RCS and a calcium hydroxide-based paste. For normal values, ANOVA test was used, followed by Tukey post-test. For non-normal values, the Kruskall-Wallis test was used. BioRootTM RCS and EndoSequence BC SealerTM stimulated the highest expression of markers for M1 macrophages, while calcium hydroxide-based paste stimulated the lowest expression of these gene markers. For M2 protein markers, BioRootTM RCS presented the highest stimulation while calcium hydroxide-based paste also presented the lowest stimulation. It was concluded that all the evaluated filling materials increased the genetic expression of pro- and anti-inflammatory markers: TNF-α and IL-10 respectively. The others proinflammatory mediators showed differences against the filling materials. However, this process did not induce the inflammatory response polarization, resulting in a hybrid macrophage.

Resumo O objetivo deste estudo foi avaliar a modulação dos macrófagos M1 e M2 após estímulos com diferentes materiais utilizados durante o tratamento endodôntico. Em cultura de células de macrófagos derivados da medula óssea de camundongos machos C57BL/6 wild-type (WT), após a exposição à cinco cimentos endodônticos: AH Plus, Sealapex Xpress, Endosequence BC Sealer, BioRoot RCS e pasta à base de hidróxido de cálcio foi realizada a análise da expressão gênica dos marcadores para macrófagos M1 e M2 por qRT-PCR (Cxcl10, CxCL9, iNOS, Arg1, Chil3, Retnla e MRC1) e quantificação de citocinas por Luminex® (GM -CSF, IL-10, IL-6, IL-1β e TNF-α). Para valores normais, foi utilizado o teste ANOVA, seguido do pós-teste de Tukey. Para valores não normais, foi utilizado o teste de Kruskall-Wallis. BioRootTM RCS e EndoSequence BC SealerTM estimularam maior expressão de marcadores para macrófagos M1, enquanto a pasta à base de hidróxido de cálcio estimulou expressão mais baixa desses marcadores gênicos. Para o marcador de proteínas para M2, BioRootTM RCS apresentou a maior estimulação, enquanto a pasta à base de hidróxido de cálcio também apresentou menor estimulação. Concluiu-se que os materiais obturadores avaliados aumentaram a expressão genética de marcadores pró- e anti-inflamatórios: TNF-α e IL-10 respectivamente. Os demais marcadores pró inflamatórios mostraram diferenças em relação aos materiais obturadores. No entanto, esse processo não induziu a polarização da resposta inflamatória, resultando em um macrófago híbrido.

Biological properties of experimental methacrylate-based sealers containing calcium phosphates

Abstract This study aimed to evaluate, in vitro and in vivo, the biocompatibility of experimental methacrylate-based endodontic sealers containing α-tricalcium phosphate (α-TCP) or nanostructured hydroxyapatite (HAp). Experimental methacrylate-based dual-cure sealers with the addition of α-TCP or HAp, at 10%wt were formulated and compared to AH Plus (AHP). Cell viability was assessed by 3-(4,5-dimethyl-thiazoyl)-2,5-diphenyl-tetrazolium bromide (MTT), and sulforhodamine B (SRB). Sealers were implanted in rats' subcutaneous tissue and histologically evaluated. Bioactivity was assessed by alkaline phosphatase enzyme activity (ALP) and Alizarin Red (AR), using apical papillary cells (SCAPs), and by the bone deposition measured in surgical cavities on rats' femur filled with AH Plus or α-TCP. In both viability assays, HAp and AHP sealers were similar, and α-TCP presented lower viability compared to the others at MTT assay (p<0.05). A gradual decrease of the inflammatory response according to the periods was observed and AHP was the only that presented giant cells (7-day period). Collagen fibers condensation increased according to the periods, with no differences among sealers. There was an increase at ALP activity and mineralized nodules deposition according to periods. HAp and α-TCP presented higher values for ALP activity at 5 days and at 5, 10, and 15 days for AR and were different from AHP (p<0.05). α-TCP presented superior values at 10 and 15 days compared to HAp and AHP for AR (p<0.05). At 90 days, α-TCP and control (empty cavity) showed high bone deposition compared to AHP (p<0.05). α-TCP and HAp, in a methacrylate-based sealer, presented biocompatibility and bioactivity, with the potential to be used as endodontic sealers in clinical practice. Further investigations are required to gain information on the physicochemical properties of these sealers formulation before its clinical implementation.

Resumo O objetivo deste estudo foi avaliar a biocompatibilidade de cimentos endodônticos experimentais à base de metacrilato contendo fosfato α-tricálcico ou hidroxiapatita nanoestruturada in vitro e in vivo. Cimentos experimentais de cura dual à base de metacrilato com a adição de fosfato de α-tricálcico (α-TCP) ou hidroxiapatita (HAp), a 10% em peso, foram formulados e comparados com AH Plus (AHP). Viabilidade celular foi avaliada por brometo de 3- (4,5-dimetil-tiazoil) -2,5-difenil-tetrazólio (MTT) e sulforodamina B (SRB). Cimentos foram implantados no tecido subcutâneo dos ratos e avaliados histologicamente. Bioatividade foi avaliada pela atividade da enzima fosfatase alcalina (ALP) e Alizarin Red (AR) utilizando células da papila apical (SCAPs) e pela deposição óssea, medida em cavidades cirúrgicas no fêmur de ratos preenchidos com AH Plus e α-TCP. Nos dois ensaios de viabilidade, HAp e AHP não apresentaram diferenças estatísticas, α-TCP apresentou menores resultados de viabilidade para o ensaio MTT (p <0,05). Resultados histológicos mostraram que houve uma diminuição do conteúdo inflamatório de acordo com os períodos, e o AHP foi o único grupo que apresentou células gigantes (período de 7 dias). A condensação das fibras colágenas aumentou conforme os períodos, sem diferenças entre os grupos. Houve aumento da atividade da ALP e deposição de nódulos mineralizados de acordo com os períodos. HAp e α-TCP apresentaram maiores valores para a atividade de ALP em 5 dias e em 5, 10 e 15 dias para AR, com diferença para o AHP (p <0,05). O α-TCP apresentou valores superiores aos 10 e 15 dias quando comparado ao HAp e AHP para AR (p <0,05). Aos 90 dias, α-TCP e controle (cavidade vazia) apresentaram maior deposição de tecido ósseo quando comparado ao AHP (p <0,05). α-TCP e HAp, presentes nos cimentos à base de metacrilato, apresentaram biocompatibilidade e potencial para serem utilizados como seladores endodônticos na prática clínica. Investigações adicionais são necessárias para obter informações sobre as propriedades físico-químicas dessas formulações de cimentos antes de sua implementação clínica.

Effect of different dimensions of test samples on the volumetric change assessment of endodontic materials

Abstract New methodologies using micro-CT to evaluate solubility besides dimensional and morphological changes of endodontic materials are proposed. However, there is no standardization in the methods. The aim of this study was to assess the effect of different dimensions of test samples on volumetric change evaluation of different endodontic materials. AH Plus, FillCanal and Sealapex root canal sealers, Biodentine, IRM and MTA root-end filling cements were used in the tests. Samples of each material with a thickness of 1.5 mm and different diameters were manufactured: 6.3, 7.75, and 9.0 mm. The samples were scanned in micro-computed tomography (micro-CT) after setting and after 7 days of immersion in distilled water. The volumetric change was evaluated by means of the difference in the total volume of the specimens before and after immersion. Data were submitted to ANOVA and Tukey tests (p<0.05). The size of the samples did not affect the percentage of volumetric change of the materials (p>0.05). All sample sizes had greater volume loss for Sealapex among the sealers and Biodentine for the cements (p<0.05). In conclusion, Biodentine and Sealapex had the highest volume loss after immersion. Samples with 1.5 mm thickness, and diameters ranging between 6.3 and 9.0 mm can be used to assess the stability of endodontic materials using micro-CT without affecting the percentage of volumetric change.

Resumo Novas metodologias utilizando micro-CT são propostas para avaliar a solubilidade além de alterações dimensionais e morfológicas em materiais endodônticos. No entanto, não há padronização nos métodos. O objetivo deste estudo foi avaliar o efeito de diferentes dimensões de corpos de prova na avaliação da alteração volumétrica de diferentes materiais endodônticos. Os cimentos obturadores AH Plus, FillCanal e Sealapex e os cimentos retrobturadores Biodentine, IRM e MTA foram utilizados nos testes. Foram confeccionadas amostras de cada material com espessura de 1.5 mm e diâmetros diferentes: 6.3, 7.75 e 9.0 mm. As amostras foram escaneadas em microtomografia computadorizada (micro-CT) após a presa e após 7 dias de imersão em água destilada. A alteração volumétrica foi avaliada por meio da diferença no volume total dos corpos de prova antes e após a imersão. Os dados foram submetidos aos testes ANOVA e Tukey (p<0,05). A dimensão das amostras não afetou o percentual de alteração volumétrica dos materiais (p>0,05). Todos os diâmetros de amostra mostraram maior perda de volume para Sealapex entre os cimentos obturadores e Biodentine entre os cimentos retrobturadores (p<0,05). Como conclusão, Biodentine e Sealapex mostraram a maior perda volumétrica após a imersão. Amostras com 1.5 mm de espessura e diâmetros variando entre 6.3 e 9.0 mm podem ser usadas para avaliação da estabilidade de materiais endodônticos utilizando micro-CT, sem influenciar no percentual de alteração volumétrica.

Micro-push-out bond strength of mineral­based root canal sealer in canals with different tapers / Fuerza de unión por micro-expulsión del sellador de conductos radiculares a base de minerales en conductos con diferentes ahusamientos

Objective: The aim of this study was to assess the micro-push-out bond strength of a mineral-based root canal sealer, BioRoot RCS in canals prepared by K3XF rotary systems of two different tapers. Material and Methods: Eighty caries free maxillary central incisors were used in this study. The samples were allocated into 4 groups (n=20) according to the root canal sealer and taper of the rotary instruments. The samples were obturated using single cone obturation technique. From each root 1mm thick slices at coronal, middle and apical thirds were collected using hard tissue microtome under continuous water coolant. Push-out tests were done for these sections using a Universal testing machine (INSTRON 8801) at a crosshead speed of 1mm/min. One-way analysis of variance (ANOVA) was used to compare the bond strengths within groups and Tukey's multiple post hoc analysis was used for pair-wise comparison of bond strengths. Results: AH Plus exhibited higher micro-push-out bond strength than BioRootRCS though they did not differ significantly (p>0.05). Preparation of root canals with 6% taper rotary instruments showed higher bond strength than 4% though they did not differ significantly (p>0.05). Conclusion: There was no significant difference between micro-push-out bond strength values of BioRoot RCS and AH Plus. The bond strength values were high in 6% taper canals than 4% canals though the difference was not significant statistically.

Objetivo: El objetivo de este estudio fue evaluar la fuerza de unión por micro-expulsión de un sellador de conductos radiculares de base mineral, BioRoot RCS, en conductos preparados por sistemas rotativos K3XF con dos conos diferentes. Material y Métodos: En este estudio se utilizaron 80 incisivos centrales superiores libres de caries. Las muestras se distribuyeron en cuatro grupos (n = 20) de acuerdo al sellador del conducto radicular y al cono de los instrumentos rotativos. Las muestras se obturaron mediante la técnica de obturación de un solo cono. De cada raíz se recogieron rodajas de 1 mm de grosor en los tercios coronal, medio y apical utilizando un micrótomo de tejido duro con refrigeración continua por agua. Posteriormente, se realizó una prueba de expulsión para estas secciones utilizando una máquina de prueba universal (INSTRON 8801) a una velocidad del cabezal transversal de 1mm/min. Se utilizó el análisis de varianza unidireccional (ANOVA) para comparar las resistencias de la unión dentro de los grupos y el análisis post hoc multiple de Tukey se utilizó para la comparación por pares de las resistencias de la unión. Resultados: AH Plus exhibió una fuerza de unión de micro-expulsión más alta que BioRootRCS, aunque no difirieron significativamente (p>0,05). La preparación de los conductos radiculares con instrumentos rotativos ahusados al 6% mostró una fuerza de unión superior al 4%, aunque no difirieron significativamente (p>0,05). Conclusión: No hubo diferencias significativas entre los valores de fuerza de unión de micro-expulsión de BioRoot RCS y AH Plus. Los valores de la fuerza de unión fueron más altos en canales cónicos al 6% que en canales al 4%, aunque la diferencia no fue significativa estadísticamente.

Cytotoxicity, and antimicrobial and physicochemical properties of sealers incorporated with Uncaria tomentosa

Abstract This study evaluated the cytotoxicity, the antimicrobial and physicochemical properties of root canal sealers incorporated with phytotherapic Uncaria tomentosa (UT). Unmodified AH Plus (Dentsply, DeTrey, Germany) and MTA Fillapex (Angelus, Londrina, Brazil) were used as controls. UT was incorporated into AH Plus and MTA Fillapex, at concentrations of 2% and 5% of the total weight of these sealers (w/w). Flowability, setting time, and solubility were evaluated following ISO requirements. The pH values were measured at periods of 12, 24, 48 hours, and 7 days. The antimicrobial activity of the sealers against Enterococcus faecalis was analyzed by both direct contact tests in freshly prepared sealers, and after 7 days. The cytotoxicity of the samples was evaluated by the MTT assay, to check Balb/c 3T3 cell viability. The statistical analysis was performed by one-way ANOVA and Tukey's test (p < 0.05). The incorporation of UT was associated with a decrease in flow, for both sealers, an increase in AH Plus setting time, increase in MTA Fillapex pH values, and solubility (after 14 days), for both sealers (p < 0.05). Regarding the antibacterial evaluation, bacterial reduction was reported after incorporation of UT into both AH Plus and MTA Fillapex, up to 7 days after handling of the material (P<0.05). UT incorporation decreased the cytotoxic effects of both AH Plus and MTA Fillapex sealers in a way directly proportional to their respective concentrations (p < 0.05). In conclusion, UT can be added to both sealers to reduce their cytotoxicity, and improve their antibacterial effects, without compromising their original physicochemical properties.

Antibacterial Activity of a New Ready-To-Use Calcium Silicate-Based Sealer

Abstract The aim of this study was to evaluate the antibacterial potential of a calcium silicate-based sealer (Bio-C Sealer, Angelus) against common bacteria in primary and secondary endodontic infections. Enterococcus faecalis, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Streptococcus mutans were exposed to fresh Bio-C Sealer for 24 h by the agar diffusion method (n=5). Additionally, the antibacterial activity was investigated against E. faecalis and S. mutans biofilms (48 h old) grown in discs with 4 mm in diameter and 2 mm in height. (n=3) of set discs of Bio-C Sealer (Angelus), EndoFill (Dentsply-Mallefer), Sealer 26 (Dentsply), AH Plus (Dentsply), Sealapex (Sybron-Endo) and EndoSequence BC Sealer (Brasseler). The antibacterial activity was evaluated by colony forming unity (CFU) counting using ImageJ software. Data were compared by one-way ANOVA followed by Holm-Sidak test (a=5%). Fresh Bio-C Sealer exhibited antimicrobial activity against all bacteria evaluated by agar diffusion method, except for S. mutans. Set discs of all endodontic sealers tested showed similar CFU values for E. faecalis (p>0.05). S. mutans in biofilms showed higher susceptibility to EndoFill compared with the other sealers (p<0.05). In conclusion, the results indicate that fresh Bio-C Sealer does not inhibit S. mutans growth, but exhibits antibacterial activity against E. faecalis, S. aureus, P. aeruginosa and E. coli. After setting, the Bio-C Sealer exhibits an antimicrobial potential comparable to that of the other sealers evaluated in E. faecalis biofilm, but lower than that of EndoFill for S. mutans biofilm.

Resumo O objetivo deste estudo foi avaliar o potencial antibacteriano do novo cimento biocerâmico (Bio-C Sealer, Angelus) contra bactérias comuns em infecções endodônticas primárias e secundárias. Culturas de Enterococcus faecalis, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus e Streptococcus mutans foram expostos a amostras frescas do Bio-C sealer durante 24 h pelo método de difusão em agar (n=5). A atividade antibacteriana de amostras dos cimentos Bio-C Sealer (Angelus), EndoFill (Dentsply-Mallefer), Sealer 26 (Dentsply), AH Plus (Dentsply), Sealapex (Sybron-Endo) e EndoSequence BC Sealer (Brasseler) após a presa também foi investigada em biofilmes de 48 h das bactérias E. faecalis e S. mutans, crescidos em discos com 4 mm de diâmetro e 2 mm de altura. A atividade antibacteriana foi avaliada por contagem das unidades formadoras de colônias (UFC) utilizando o software ImageJ. Os dados foram comparados por ANOVA a um critério seguido pelo pós-teste Holm-Sidak (a=5%). Amostras frescas do Bio-C Sealer exibiram atividade antimicrobiana contra todas as bactérias avaliadas pelo método de difusão em ágar, exceto para S. mutans. A análise da formação de biofilme mostrou que todos os cimentos endodônticos testados apresentaram valores similares de UFC para E. faecalis (p> 0,05), enquanto biofilmes de S. mutans foram mais suscetíveis ao EndoFill em comparação com os demais cimentos (p<0,05). Conclui-se que o cimento Bio-C Sealer fresco exibe atividade antibacteriana para E. faecalis, S. aureus, P. aeruginosa e E. coli, mas não inibe o crescimento de S. mutans. Após a presa, o cimento Bio-C Sealer exibe potencial antimicrobiano similar ao dos demais cimentos avaliados em biofilme de E. faecalis, mas inferior ao do EndoFill para S. mutans.

Dentinal tubule penetration of a calcium silicate-based root canal sealer using a specific calcium fluorophore

Abstract This study aimed to evaluate penetrability on dentinal tubule of a new bioceramic sealer through confocal laser scanning microscopy (CLSM). A specific fluorophore (Fluo-3) was mixed with the sealer. Forty distobuccal roots from maxillary molars were selected, and root canal preparation was carried out with Wave One Gold # 35.06 instruments. Roots were randomly assigned to 4 groups according to the filling procedures: Bioceramic/Lentulo (Sealer Plus BC); Bioceramic/EasyClean group, three activation of the sealer (3x20 s) with Easy Clean instrument; Bioceramic/Irrisonic: ultrasonic activation for 30 s; and AHplus/Lentulo: epoxy resin based sealer (AH Plus) was utilized with the same protocol as the BC/LE group. After 72 h, specimens were transversally sectioned at 2 and 7 mm from root apex and then analyzed through CLSM. Sealer penetration area on dentinal tubule was measured by Adobe Photoshop CC2018. Kruskal Wallis and Wilcoxon T tests were carried out. Penetrability results were similar for both sealers regardless of which technique was performed to activate them inside the root canal (p>0.05). It is reasonable to conclude that penetration of bioceramic and epoxy resin based sealers occurred unimpressively. The type of instrument used to activate bioceramic sealer did not affect penetrability. Fluo 3 should be recommended as the fluorophore to evaluate dentinal tubule penetration of bioceramic sealers.

Resumo Este estudo objetivou avaliar a penetração nos túbulos dentinários de um novo cimento biocerâmico utilizando microscopia confocal de varredura a laser (MCVL). Um fluoróforo específico (Fluo-3) foi misturado com o cimento. Quarenta raízes distovestibulares de molares superiores foram selecionados e o preparo do canal radicular foi realizado com instrumentos Wave One Gold #35.06. As raízes foram divididas randomicamente em quatro grupos de acordo com os procedimentos obturadores: Bioceramic/Lentulo: cimento biocerâmico (Sealer Plus BC); Bioceramic/EasyClean: três ativações do cimento com instrumento Easy Clean (3 x 20 s); Bioceramic/Irrisonic: ativação ultrassônica do cimento por 30 s e AHplus/Lentulo: cimento à base de resina epóxica (AH Plus) foi utilizado com o mesmo protocolo que o grupo Bioceramic/Lentulo. Após 72h, os espécimes foram seccionados transversalmente em 2 e 7 mm do ápice radicular e analisados com MCVL. A área de penetração nos túbulos dentinários foi mensurada com Adobe Photoshop CC2018. O teste de Kruskal Wallis e T de Wilcoxon foram realizados. Os resultados de penetração foram similares para ambos os cimentos independentemente de qual técnica foi utilizada para ativá-los no interior do canal radicular (p>0,05). É razoável concluir que a penetração de cimentos biocerâmicos e à base de resina epóxica ocorreram de forma pouco expressiva. O tipo de ativação do cimento biocerâmcio não afeta sua penetrabilidade nos túbulos dentinários. Fluo 3 deve ser recomendado como o fluoróforo para avaliar a penetração intratubular de cimentos biocerâmicos.

Comparative effects of final canal irrigation with chitosan and EDTA

Abstract Chitosan is a natural, biocompatible chelating substance with potential for dental use. This study compared the effects of final canal irrigation with chitosan and EDTA on dentin microhardness, sealer dentin tubules penetration capacity, and push-out strength. Methodology: Fifty canine roots were distributed according to the final irrigation protocol (n=10): G1- 15% EDTA with conventional irrigation; G2- 15% EDTA with Endovac; G3- 0.2% chitosan with conventional irrigation; G4- 0.2% chitosan with Endovac; and G5- without irrigation. Specimens were obturated (AH Plus) and sectioned in 3 slices per root third. The first slice was used for microhardness and sealer penetration assessments under a laser confocal microscope. The second was utilized in a push-out strength test. The third slice was discarded. Data were analyzed using 2-way ANOVA and Tukey's post hoc test (α<0.05). Failure mode was determined at x40 magnification. Results: Microhardness reduction was more significant in groups G2 and G4 (p<0.05). Sealer penetration through dentin was significantly greater in group G2 (p<0.05). There was no significant difference between groups G1, G3, and G4 (p>0.05). In general, all experimental groups presented similar bond resistance (p>0.05) that significantly differed from the control (p<0.001). Mixed type failures were predominant. Conclusions: In general, 0.2% chitosan and 15% EDTA solutions act in a similar manner with regard to the variables studied. The use of Endovac potentiates the effect of these solutions.

Endodontic sealers and post-endodontic waiting time affect the bond strength of the fiber posts / Cimentos endodônticos e tempo de espera após endodontia afeta a resistência de união de pinos de fibra

Introduction: The resistance adhesive of a fiber post can be affected by several factors, such as the endodontic sealer and post-endodontic waiting time. Objective: The aim of this study was to evaluate the effect of different endodontic sealers and two different post-endodontic waiting times on the bond strength of fiber posts. Material and method: Seventy-two bovine teeth were endodontically treated and filled using three endodontic sealers: eugenol-based, epoxy resin-based, or mineral trioxide aggregate-based. The specimens were stored at 37°C for 24 hours or for 30 months. After the respective storage times, the root canals were prepared for luting fiber posts using RelyX U200. Push-out tests and analysis of failures were performed. The push-out data were analyzed by two-way analysis of variance to compare the effects of the endodontic sealer and with the t-test to compare the effects of post-endodontic waiting time. Result: The AH Plus sealer yielded the highest bond strength values at 30 months post-endodontics (11.26 Mpa) (p < 0.05), however no had difference with Endofill sealer at the same time. Endofill and MTA Fillapex sealers did not differ significantly in their effects, irrespective of the post-endodontic waiting time. Conclusion: In conclusion, the endodontic sealer used and post-endodontic waiting time affect the adhesive resistance of fiber posts. The adhesion increases significantly when the fiber post is cemented 30 months after the root canal filling, while the adhesion is reduced when cementing immediately after root canal treatment, in particular for eugenol-based endodontic sealers.

Introdução: A resistência de união de um pino de fibra pode ser afetada por vários fatores, como o cimento endodôntico e o tempo de espera pós-endodontia. Objetivo: Avaliar o efeito de diferentes cimentos endodônticos e dois tempos de espera pós-endodontia na resistência de união de pinos de fibra. Material e método: Setenta e dois dentes bovinos foram tratados endodonticamente e obturados usando três cimentos endodônticos: à base de eugenol, à base de resina epóxia ou à base de mineral trióxido agregado. Os espécimes foram armazenados a 37 ° C por 24 horas ou por 30 meses. Após, os canais radiculares foram preparados para cimentação dos pinos de fibra usando o RelyX U200. Foram realizados testes de push-out e análise de falhas. Os dados foram analisados por análise de variância bidirecional e com o teste t. Resultado: O cimento AH Plus obteve os maiores valores de resistência de união aos 30 meses pós-endodontia (11,26 Mpa) (p <0,05), no entanto, não houve diferença com o cimento Endofill no mesmo tempo. Os cimentos Endofill e MTA Fillapex não diferiram significativamente em seus efeitos, independentemente do tempo de espera pós-endodontia. Conclusão: O cimento endodôntico utilizado e o tempo de espera pós-endodontia afetam a resistência adesiva dos pinos de fibra. A adesão aumenta significativamente quando o pino de fibra é cimentado 30 meses após a obturação do canal radicular, enquanto a adesão é reduzida ao cimentar imediatamente após o tratamento do canal radicular, principalmente para cimentos endodônticos à base de eugenol.

Postoperative pain after root canal filling with different endodontic sealers: a randomized clinical trial

Abstract The aim of this randomized clinical trial was to compare the occurrence and intensity of postoperative pain and analgesic intake after root canal treatment, using different root canal sealers. Sixty single-rooted teeth diagnosed with asymptomatic necrosis and apical periodontitis were randomly assigned to 3 experimental groups (n=20), according to the root canal sealer: AH Plus, Endofill or MTA Fillapex. Endodontic treatment was performed in two sessions, and calcium hydroxide was used as the intracanal dressing. Patients were instructed to record pain intensity as none, slight, moderate and severe. Scores from 1 to 4 were attributed to each level of pain after 24 h, 48 h and 7 days. The need for analgesic intake was also recorded. Differences in the incidence of postoperative pain and the need for an analgesic were analyzed using the chi-square test. Differences in pain intensity after treatment were analyzed using the ordinal (linear) chi-square test. No significant differences were detected among the groups in terms of either incidence or intensity of postoperative pain, or need for analgesic intake, at any timepoint (p>0.05). No pain was reported after 7 days. AH Plus, Endofill and MTA Fillapex used for filling root canals resulted in the same rate of postoperative pain and need for analgesic medication.

Microfiltración apical entre dos cementos de obturación: biocerámico y resinoso en premolares unirradiculares preparadas con protaper, y obturadas con condensación lateral / Apical microfiltration between two filling cements: bioceramic and resinous in unirradicular premolars prepared with protaper and sealed with lateral condensation

Resumen Objetivo: Comparar in vitro la microfiltración apical en premolares unirradiculares obturados con cemento a base de resina epóxica y cemento biocerámico. Método: 40 piezas dentales unirradiculares fueron seleccionadas y divididas en dos grupos para ser obturadas esperando el tiempo de fraguado de acuerdo con las instrucciones del fabricante. El grupo A se obturó con cemento biocerámico Endosequence y, el grupo B, con cemento a base de resina epóxica AH-Plus: posteriormente los dos grupos fueron sellados con barniz de uñas hasta 3mm de la parte apical, luego se colocaron las muestras en la incubadora a 37ºC. Ambos fueron sometidos a 750 ciclos de termociclado, para reproducir el ambiente parecido a la cavidad oral. Para análisis de microfiltración se utilizó el método de difusión del colorante, se sumergieron en azul de metileno al 2 % por 6 días, posteriormente los especímenes fueron sometidos en una bomba de vacío. Los dientes fueron cortados longitudinalmente para ser evaluadas mediante el estereomicroscopio. El análisis estadístico fue hecho mediante T-Student y Chi-Cuadrado. Resultados: El grupo A corresponde a Endosequence obtuvo una medida de 0,55mm y el grupo B corresponde a AH-Plus 1,20mm con un estimado de significancia de p=0,013. Conclusión: El análisis de ambos cementos de obturación demostró que Endosequence posee menor microfiltración apical que AH-Plus.

Abstract Aim: To compare in vitro by the stereomiscroscope the lesser apical microfiltration in uniradicular premolars, between the cement based on Epoxy Resin and Bioceramic cement. Method: The study was performed on 40 uniradicular dental pieces divided into two groups, the samples were prepared using the protaper system and the obturation was performed using the lateral condensation technique, the first group was sealed withEndosequence bioceramic cement and the second group with Cement based on AH-Plus epoxy resin, then sealed with nail varnish up to 3mm from the apical part, then the samples were placed in the incubator at 37ºC, waiting for the set time corresponding to each group according to the manufacturer's instructions . The two groups of the present study were submitted to 750 cycles of thermocycling, to provide an environment similar to the oral cavity, then longitudinal cuts were made to the samples. The microfiltration was evaluated using the dye diffusion method, immersed in 2% methylene blue for 6 days, then the specimens were subjected to a vacuum pump. The teeth were cut longitudinally to be evaluated by the stereomicroscope. The statistical analysis was through T-Student and Chi-Square. Results: Group A corresponds to Endosequence obtained a mean of 0,55mm and Group B corresponds to AH-Plus 1,20mm with an estimated significance of p = 0,013. Conclusion: Both obturation cements have significant differences, therefore Endosequence has less apical microfiltration than AHPlus.

Correlation between bond strength to dentin and sealers penetration by push-out test and clsm analysis

Abstract This study correlated the bond strength (BS) and dentin penetration of different sealers by push-out test and Confocal Laser Scanning Microscopy (CLSM) analysis. Forty-five root canals were prepared according to the crown-down technique and filled with gutta-percha associated to the following sealers (n=15): Endofill, AH Plus and MTA Fillapex. Five canals of each group were filled with the sealers added with 0.1% Rhodamine B dye. Next, the specimens were transversely sectioned and submitted to the push-out test (n=10) and CLSM analysis (n=5). The BS data showed the following means (MPa) and standard deviation: AH Plus (4.17±1.86); MTA Fillapex (3.13±1.96) and Endofill (2.10±1.03). Statistical analysis (two-way ANOVA, α=0.05) showed significant difference among sealers (p<0.001) and root canal thirds (p<0.001). The BS results of Endofill and MTA Fillapex were statistically similar (p>0.05), however, they were statistically different from AH Plus (p<0.001). The regional analysis of BS showed similarity between middle and apical thirds (p>0.05), and both were different from coronal portion (p<0.001). CLSM analysis verified tags formation in all groups and higher penetration of the specimens filled with AH Plus (p<0.05). The Kendall test (correlation between BS to dentin and sealer penetration into dentinal tubules) and the Pearson test (between failures pattern and sealer penetration into dentinal tubules) did not show correlation between the variables evaluated for all the tested sealers (p>0.05). AH Plus group had higher BS to dentin, and deeper tags formation than the other sealers. There was no significant correlation between BS and intratubular penetration of the tested sealers.

Resumo Este estudo correlacionou a resistência de união (RU) e a penetração de cimentos de diferentes bases à dentina radicular por meio do teste push-out e da análise por microscopia Confocal a laser (MCL). Quarenta e cinco canais radiculares foram preparados pela técnica coroa-ápice e obturados com guta-percha associada aos seguintes cimentos (n=15): Endofill, AH Plus e MTA Fillapex. Para análise por MCL da penetração dos cimentos, cinco canais foram obturados com os cimentos manipulados com Rodamina B a 0,1%. Em seguida, os espécimes foram seccionados transversalmente e submetidos ao teste de push-out (n=10) e análise por MCL (n=5). Os dados da RU apresentaram as seguintes médias (MPa) e desvio padrão: AH Plus (4,17±1,86); MTA Fillapex (3,13±1,96) e Endofill (2,10±1,03). A análise estatística (two-way ANOVA, α=0,05) mostrou diferença significativa entre os cimentos (p<0,001) e as regiões do canal radicular (p<0,001). Os resultados de RU de Endofill e MTA Fillapex foram estatisticamente semelhantes (p>0,05), no entanto, foram estatisticamente diferentes de AH Plus (p<0,001). A análise regional da RU demonstrou semelhança entre as regiões média e apical (p>0,05), e ambas foram diferentes da região cervical (p<0,001). A análise por MCL verificou a formação de tags em todos os grupos, com maior penetração nos espécimes obturados com AH Plus (p<0,05). O teste de Kendall (correlação entre RU à dentina e profundidade de penetração dos cimentos na dentina) e o teste de Pearson (correlação entre o padrão de falha e a profundidade de penetração dos cimentos na dentina) não evidenciaram correlação significativa entre as variáveis avaliadas nos cimentos testados (p<0,05). O grupo AH Plus apresentou maior RU, e formação de tags mais profundos que os outros cimentos. Não houve correlação significativa entre RU e penetração intratubular dos cimentos testados.

Physicochemical properties and bioactive potential of a new epoxy resin-based root canal sealer

Abstract The aim of this study was to evaluate physicochemical properties and bioactive potential of Sealer Plus, in comparison with MTA Fillapex, Sealapex and AH Plus. Setting time, flow, and radiopacity were evaluated based on ISO 6876 Standard. Flow was also assessed in area (mm²). The solubility and volumetric change of the sealers were evaluated after 7 and 30 days of immersion in distilled water. Solubility was evaluated by the difference in mass of materials before and after immersion. Volumetric change was evaluated by using microcomputed tomography (micro-CT). The bioactive potential was observed by Scanning Electron Microscopy (SEM) after immersion in PBS. Data were compared using ANOVA and Tukey tests (α=0.05). Sealer Plus presented the shortest setting time (196 min.) and Sealapex the longest (912 min.) (p<0.05). AH Plus showed the highest radiopacity (9.5 mm Al) and MTA Fillapex the lowest (2.7 mm Al) (p<0.05). All the sealers presented flow in accordance with ISO 6876/2012 (>17 mm). Sealer Plus showed low solubility and volumetric change (<1%), and MTA Fillapex showed the highest solubility (>25%), and volumetric change (>4%) after all time intervals (p<0.05). MTA Fillapex was the only sealer that showed bioactive potential. In conclusion, Sealer Plus presented proper physicochemical properties. However, this sealer did not present a bioactive potential.

Resumo O objetivo deste estudo foi avaliar as propriedades físico-químicas e o potencial bioativo de Sealer Plus, em comparação com MTA Fillapex, Sealapex e AH Plus. Tempo de presa, escoamento e radiopacidade foram avaliados com base nas normas ISO 6876. O escoamento foi também avaliado em área (mm²). A solubilidade e a alteração volumétrica dos cimentos foram avaliadas após 7 e 30 dias de imersão em água destilada. A solubilidade foi analisada pela diferença entre as massas dos cimentos antes e após imersão. A alteração volumétrica foi avaliada por meio de microtomografia computadorizada (micro-CT). O potencial bioativo dos cimentos foi observado por Microscopia Eletrônica de Varredura (MEV) após imersão em PBS. Os dados foram comparados usando os testes ANOVA e Tukey (α=0.05). Sealer Plus apresentou o tempo de presa mais curto (196 min.) e Sealapex o mais longo (912 min.) (p<0.05). AH Plus mostrou a radiopacidade mais alta (9.5 mm Al) e MTA Fillapex a mais baixa (2.7 mm Al) (p<0.05). Todos os cimentos tiveram escoamento de acordo com as normas ISO 6876/2012 (>17 mm). Sealer Plus mostrou baixos valores de solubilidade e alteração volumétrica (<1%) e MTA Fillapex teve os valores mais altos de solubilidade (>25%) e alteração volumétrica (>4%) em todos os períodos avaliados (p<0.05). MTA Fillapex foi o único cimento que mostrou potencial bioativo. Como conclusão, Sealer Plus apresentou propriedades físico-químicas adequadas, entretanto, não apresentou potencial bioativo.